Concrete Coating Driveway Solutions for 7 Common Problems
Your driveway helps create a powerful first impression of your home. It's also one of the most abused surfaces on your property, constantly exposed to the harsh California sun, heavy vehicle traffic, oil leaks, and occasional chemical spills. For homeowners in Kern County, a standard concrete driveway is a ticking clock; it's only a matter of time before it begins to show its age.
At Steve Holloway Painting, we don't just paint homes. We’re experts in concrete surface protection. Our driveway coatings service transforms worn, damaged, or dull concrete into durable, beautiful, low-maintenance surfaces that last for decades.
Keep reading to see how a high-performance concrete coating can effectively address seven of the most common driveway problems.
7 Common Driveway Problems and How Coatings Fix Them
A high-quality concrete coating prevents deterioration and provides long-term protection. Let's look at the specific problems our coating system solves:
1. Cracking and Spalling
The Problem: Standard concrete is rigid and porous. Over time, the ground shifts, and water seeps in, causing the concrete to crack, chip, and flake (spall). These issues are not only unsightly but can also be a tripping hazard.
The Coating Fix: Before applying our Penntek polyurea coating, our expert crew meticulously repairs all cracks and pits using specialized menders and fillers. The coating itself is a flexible, seamless membrane that bridges minor surface imperfections and helps prevent water penetration, effectively slowing the cycle of damage.
2. Unsightly Stains and Oil Leaks
The Problem: Driveways are magnets for stains: oil, grease, rust, and tire marks. Once these penetrate porous concrete, they’re nearly impossible to remove completely, leaving permanent, dark blemishes.
The Coating Fix: Our polyaspartic clear coat creates a non-porous, chemical-resistant barrier. Spills like oil, gasoline, and rust-causing water sit on the surface, where they can usually be easily wiped or hosed away, helping maintain a clean driveway with minimal effort.
3. Fading and Discoloration
The Problem: The intense UV rays of the Bakersfield sun cause standard concrete to fade and look washed out over time, diminishing your home's curb appeal.
The Coating Fix: We use a UV-stable polyaspartic topcoat. Unlike many epoxy coatings that can yellow and degrade in sunlight, our system is engineered to resist fading and maintain its vibrant color and finish over time.
4. Dangerous Slippery Surfaces
The Problem: Wet concrete can be dangerously slick, especially on a sloped driveway. This is a major safety concern for family members and visitors.
The Coating Fix: During the application process, we broadcast decorative chips that are then sealed under the clear coat. This process creates a textured, non-slip surface that provides excellent traction, even when wet, significantly enhancing the safety of your property.
5. High Maintenance and Cleaning Effort
The Problem: Keeping a bare concrete driveway clean requires frequent pressure washing and scrubbing to remove dirt, mold, and mildew that settle into the pores.
The Coating Fix: The seamless, non-porous surface of our coating is incredibly easy to clean. A simple hose-down or light mopping is usually all it takes to keep it looking brand new, freeing up your weekends for more enjoyable activities.
6. Poor Curb Appeal and Low Home Value
The Problem: A cracked, stained, and faded driveway can reduce the entire aesthetic of your home and negatively impact its resale value.
The Coating Fix: A professionally installed driveway coating instantly elevates your home's curb appeal. With a wide variety of colors and flake blends available, we can customize the look to perfectly complement your home's exterior so it makes a positive first impression.
7. The Long, Disruptive Installation Process
The Problem: Traditional concrete resurfacing or replacement can take days or even a week, leaving you unable to use your driveway while disrupting your daily routine.
The Coating Fix: As the only certified Penntek dealer in the area, we’re proud to offer a 1-day installation process for most driveway projects. Our specialized polyurea system cures rapidly, meaning you can typically walk on your new driveway in a few hours and drive on it within 24 hours, depending on weather conditions.
Solve All Your Driveway Problems in Just One Day
Since 1982, Steve Holloway Painting has been the trusted name for painting and concrete coatings in Bakersfield, CA, and the surrounding areas. Our commitment to quality, backed by a comprehensive warranty for our Penntek floor coating projects, ensures you get the best value for your investment.
Don't settle for a temporary fix or a costly replacement. Let us show you how a high-performance concrete coating can solve your driveway problems effectively.
Contact us today for a free quote. Take the first step toward a beautiful, durable driveway that enhances your home's curb appeal and withstands everything our California weather can throw at it.
