How to Prepare Your Garage for a One-Day Floor Coating in Bakersfield
Steve Holloway Painting is the only Certified Penntek Dealer in Kern and Tulare Counties, and the company's one-day garage floor coating applies to two-car garages. Before your appointment, a short list of homeowner tasks keeps the project moving, while the crew handles the technical work of preparing and coating the slab. Here is what to expect if you are in Bakersfield, Fresno, Visalia, Clovis, Tulare, Porterville, Delano, Oildale, Wasco, or Ridgecrest.
What to Clear Out Before the Crew Arrives
The most consistent preparation task for any professional coating appointment is clearing the space so the crew can work across the entire slab without interruption.
- Move vehicles out of the garage for the day
- Remove loose belongings, storage bins, and floor-level items
- Remove or protect electronics stored in the garage
- Turn off garage HVAC equipment during installation so dust, debris, and odors are not pulled into the home
- Hold off on yard work, blowing, or sweeping near the garage on installation day, since airborne debris can interfere with the coating
It also helps to let go of assumptions about pre-cleaning the slab. You do not need to scrub the floor, fill cracks, or strip old paint or sealer yourself before the appointment. Professional preparation guidance notes that homeowner-applied patches or cleaning products can complicate the crew's repair work, so it is best to leave the slab as-is and let the trained team assess it.
What the Crew Handles On Installation Day
Once the garage is clear, Steve Holloway Painting's one-day garage floor coating process covers the mechanical and technical work that should not be attempted as homeowner prep:
- Shot blasting and/or diamond grinding to properly profile the slab
- HEPA-filtered vacuum dust control throughout the process
- Crack and pit repair using Penntek fillers
- A 100% solids pure polyurea basecoat application
- Hand-broadcast decorative chips into the wet basecoat
- Scraping and vacuuming excess or upright flakes before the clear coat goes down
- A UV-stable polyaspartic clear coat as the final layer
Because chips are broadcast and then cleared of loose flakes before the clear coat is applied, keeping the garage empty and accessible throughout the day allows this sequence to move without delay. For more detail on this process, see what professional floor preparation includes.
Why "One-Day" Refers to Two-Car Garages
The one-day installation timeline is specific to two-car garages. If your garage is larger than a standard two-car space, or if the slab has extensive cracks, pits, old coatings, or other wear, the scope of work can change the project plan. This does not mean a larger or more damaged garage cannot be coated, it simply means the one-day label should not be treated as a universal promise. It is worth confirming the expected timeline for your specific garage before scheduling.
Bakersfield Heat and the UV-Stable Clear Coat
Normal daily highs in Bakersfield reach about 98.4 degrees F in July and 96.7 degrees F in August, according to NOAA National Weather Service climate normals. Sustained summer heat is one reason a UV-stable polyaspartic clear coat matters for a garage floor. Steve Holloway Painting's floor coatings are backed by a 100% satisfaction guarantee along with Penntek Limited Lifetime and 15-year product warranties, giving homeowners a documented standard to expect once the coating is complete.
Frequently Asked Questions
Do I need to clean or repair my garage floor before the appointment?
No. Mechanical surface preparation and crack or pit repair are handled by the crew as part of the coating process. Homeowner cleaning products or patches are not necessary and can sometimes complicate the repair work.
What should I remove or protect before the crew arrives?
Clear out vehicles, loose belongings, and floor-level items, and remove or protect any electronics stored in the garage. Turning off garage HVAC equipment during installation also helps keep dust and odors out of the home.
Does a one-day coating mean every garage finishes in one day?
The one-day timeline applies to two-car garages. Larger garages or slabs with extensive cracks, pits, or old coatings may require a different plan, so it is worth confirming the scope for your specific garage.
Schedule Your Garage Floor Coating in Bakersfield
Steve Holloway Painting proudly serves Bakersfield and the surrounding Kern and Tulare County communities, including Fresno, Visalia, Clovis, Tulare, Porterville, Delano, Oildale, Wasco, and Ridgecrest, as the only Certified Penntek Dealer in the region. Call (661) 325-8520 to schedule your one-day garage floor coating and ask about the 100% satisfaction guarantee with Penntek Limited Lifetime and 15-year product warranties.
